The method for confirming the air actions set in Clip Studio Paint will vary depending on the device you are using.

Please find your device’s method below.

Note:

To use the air action feature, Air Actions must be turned on in the Settings app

Make sure the Air Action function is turned on by doing the following:

1. Open Settings on your device

2. Select Useful Features or Advanced Features.

3. Select S Pen

4. Select Air Actions

Make sure that Air Actions are turned on in the Air Actions setting screen.

Confirm with floating icon

1. With Clip Studio Paint running, tap the floating icon.

Tap [Clip Studio] in the upper left corner of the screen.

The following screen will appear, allowing you to see the gestures according to your custom settings in Clip Studio Paint.

If the floating icon does not appear on the screen, please check S Pen in the Settings app.

1. Open Settings on your device

2. Select [Useful Features] > [S Pen.

3. Turn on Show floating icon in Air commands to display floating icons.

Confirm with the Settings app

1. Open Settings on your device

2. [Useful Features] > [S Pen] > [Air Actions]

3. Under App actions, select Clip Studio.

The following screen will appear, allowing you to see the gestures according to your custom settings in Clip Studio Paint.

Changing Custom Settings

You can change the assigned gesture by tapping the name of the custom setting on the custom settings confirmation screen.

Note: These settings can also be set to no action.

People who read this FAQ also viewed the below article.